Audi A6 3.0L TFSi 2011–2018

Exhaust systems - Performance Line

Minimum weight - Maximum sound

Performance Line
Outstanding Exhaust System with Valvetronic for everyday use. The Audi A6 3.0 Supercharged (TFSi) equipped with an iPE Innotech Performance Exhaust system awakens the sporty soul of anyone behind the steering wheel. Our Valvetronic technology offers a dynamic system that delivers both power and dynamic valve control to the driver’s seat. The remote control module delivers a 3 in 1 mode: on, off, and auto. In on mode, the valves are fully open for maximum flow and power, releasing the pure sporty sound of the engine. In off mode, the valves are closed and volume is reduced for a comfortable cruise. The auto mode enables the system to detect the engine RPM and gas pedal signal to automatically adjust the valve movements for a dynamic driving experience.

Each part of the exhaust system is individually designed to perfectly fit the Audi A6 3.0 Supercharged (TFSi) and to create a unique and breathtaking sound to break free from the ordinary.

INSTALLATION OPTIONS / PRICE LIST

SEK
Performance Line Stainless
Full system with cats
59.900 kr
Catback - Valvetronic Muffler + Remote Control Module + Tips
45.900 kr
Down pipe with cat
19.900 kr
Assembly
Full System
10.000 kr
Catback System
5.000 kr
Optional Tips
Chrome Silver Tips
4.000 kr
Titanium Blue tips
5.000 kr
Chrome Black Tips
5.000 kr
Carbon Tips
12.500 kr
Performance Line Stainless
Full system with cats
7,188 $
Catback - Valvetronic Muffler + Remote Control Module + Tips
5,508 $
Down pipe with cat
2,388 $
Assembly
Full System
1,200 $
Catback System
600 $
Optional Tips
Chrome Silver Tips
480 $
Titanium Blue tips
600 $
Chrome Black Tips
600 $
Carbon Tips
1,500 $
Performance Line Stainless
Full system with cats
6.284 €
Catback - Valvetronic Muffler + Remote Control Module + Tips
4.815 €
Down pipe with cat
2.088 €
Assembly
Full System
1.049 €
Catback System
525 €
Optional Tips
Chrome Silver Tips
420 €
Titanium Blue tips
525 €
Chrome Black Tips
525 €
Carbon Tips
1.311 €
Prices above are prices, including VAT. We always leave a detailed quotation before purchase so we can ensure you get the right products for your car.
 

COMPLETE EXHAUST SYSTEM PERFORMANCE LINE:  System including Down pipe with cat, Front pipe, X-pipe, valvetronic mufflers and  and tips in Chrome Silver (shown in picture) as standard. Titanium Blue, Black Chrome, Carbon Fiber tips are optional. 

 

CATBACK EXHAUST SYSTEM PERFORMANCE LINE:  System including Front pipe, X-pipe, valvetronic mufflers and  and tips in Chrome Silver (shown in picture) as standard. Titanium Blue, Black Chrome, Carbon Fiber tips are optional. 

 

VALVETRONIC MUFFLERS  – What is Valvetronic?  All iPE exhaust systems come with a Valvetronic muffler. A Valvetronic muffler (or valve-controlled muffler) includes exhaust valves which can influence the stream/flow of the exhaust gases. The exhaust valves can be controlled manually as well as automatically. The inner structure of the muffler (also called back-box or silencer) are individually designed with the emphasis on upgrading performance and sound, in terms of torque and horsepower as well as sound volume and sound character.

 

VALVETRONIC MUFFLERS  – Advantages of iPE:s Valvetronic: iPE’s Valvetronic exhaust systems essentially upgrade two aspects: performance and sound. Performance: When the valves are closed, torque can be increased enormously at the lower rpm range. When the valves are open, dramatic horsepower gains can be reached at the higher rpm range. Sound: With closed valves, the exhaust sound is sporty but comfortably quiet. All vibrating, drone resonance (annoying frequencies inside the car at certain rpm) are cancelled out, so that the driver and passengers can experience a comfort and relaxed ride. With open valves, the exhaust sound becomes as sporty and breathtaking as it gets. The trademark sound of iPE can now be enjoyed without limitations.

 

AUDI A6 DIFFUSOR KIT: iPE System has two double pips (2×2) designed for S/RS-Line diffusor! If you have standard edition with 2×1 pipes, one pipe on each side, you need to upgrade to a sport diffusor. Please enquire for available options!

 

DOWN PIPE WITH CAT PERFORMANCE LINE: Lightweight Down pipes engineered by iPE:s developement team for maximum performance.  The purpose of iPE:s Down pipes is to increase performance by enhancing the exhaust flow for maximum power gains. iPE Down pipes are specifically designed for maximum performance. Thanks to the precise calculations of pipe length, pipe diameter, and pipe bending, iPE Down pipes generate optimal flow of exhaust gases which results in maximum power gains. If you are looking for best performance, weight reduction more power and sound, these optional Down pipes are a must.

 

X-PIPE PERFORMANCE LINE: The X-Pipe are at the heart of iPE:s Performance Exhaustsystem and bolted in the center of the car. Also known as a crossover pipe, each system works by balancing the exhaust pulses from either side—or cylinder bank of a V-style engine. The result is a smooth exhaust flow and a more efficient engine.

 

CHROME BLACK TIPS: Cool racing tips, for your performance car. All tips are imprinted with the iPE logotype. Optional for all systems.

 

TITANIUM BLUE TIPS: Cool racing heated tips for your performance car. All tips are imprinted with the iPE logotype. Optional for all systems.

 

CHROME SILVER TIPS: Standard tips, included in the system price. All tips are imprinted with the iPE logotype.

 

CARBON FIBER TIPS: Cool racing genuine Carbon fiber tips for your performance car. All tips are imprinted with the iPE logotype. Optional for all systems.

 

AUDI 3.0 SUPERCHARGER UPGRADES: (original original power/torque: 333Hp/440Nm, max new power/torque 498Hp/597Nm.

Single Pully – Supercharger Drive Pulley Upgrade decreases the diameter of the factory pulley from ~63.25mm to 57.75mm, which in turn spins the supercharger ~9.5% faster. This results in a healthy bump in horsepower and torque across the entire RPM range with the supercharger operating at a higher rate of speed. Max power output on 98RON – 455Hp/535Nm.

Dual Pully – Upgrading both the supercharger drive and crank pulleys results in the factory supercharger spinning ~26.4% faster than stock. This speed was chosen after extensive engine and chassis dyno testing with various pulley sizes and supercharger speeds. The result is an even higher horsepower and torque gain across the entire RPM range. However, at the airflow levels achieved with a dual pulley setup, maximum power is severely restricted by the factory throttle body unit. The Ultracharger Throttle Body Upgrade is necessary to take full advantage of the dual pulley configuration. Max power output on 98RON – 465Hp/580Nm.

Ultra Charger upgrade – The Ultracharger System dramatically increases horsepower and torque, and maximizes the power potential. It removes a massive pre-supercharger restriction, allowing uninterrupted airflow into the supercharger. Max power output on 98RON – 498Hp/597Nm.

For all above Supercharger upgrades ECU Remapping is required, also upgrading fuel pump is necessary. Call us for quotation!

 

ECU remapping is when we take a read from the ECU’s processing chip of the vehicles standard tuning map. We then adjust various parameters within the map such as fuel pressure, boost pressure (on turbocharged applications) ignition advance and throttle pedal control, amongst others to release the true performance from the engine. Typical gains with remapping is: 20-40% increased Power and Torque and better fuel economy, up to 15% fuel savings. Your car gets more responsive and drivability improves.

The original data is stored on a secure hard drive and can be reinstalled if you for some reason wants to get your car back to its original state. Our remapping team road test the car thoroughly and check out that all systems works perfectly before handing over the car to you. Normally we need two days for remapping and road testing. Before leaving the car to us, fuel it up as we need approximate half tank to road test the car. Price for remapping the Audi A6 3.0 is 8.900:-

Optional Dyno Run
For all our clients we offer Dyno Run to really get the improvements on paper. You will get two readings to compare, first with original settings and secondly after remapping and installation of exhaust system. Availability of Dyno Run service is due to seasonal demand.

Specifics for Audi A6 3.0 Liter V6 Supercharged (TFSi)
The Audi A6 has original power/torque: 333Hp/440Nm improves with 18%/13% to 395Hp/491Nm. iPE:s Exhaust system together with remapping of your car improves performance and handling beyond normal standards.

 

BODY KIT – CARBON FIBER PARTS – WRAPPING – FORGED WHEELS. If you want to stand out and give your car the extra attention, we offer a wide range of tuning parts from all major manufactures. Give us your wish list and budget and we will make your dream come true! Call us for quotation!

Car

Make
Audi
Model
A6 3.0
Manufacturing year
2011-2018
Inquiry

English

ENGINE REMAPPING | ECU PROGRAMMING

ECU remapping is when we take a read from the ECU’s processing chip of the vehicles standard tuning map. We then adjust various parameters within the map such as fuel pressure, boost pressure (on turbocharged applications) ignition advance and throttle pedal control, amongst others to release the true performance from the engine. Typical gains with remapping is: 20-40% increased Power and Torque and better fuel economy, up to 15% fuel savings. Your car gets more responsive and drivability improves.

The original data is stored on a secure hard drive and can be reinstalled if you for some reason wants to get your car back to its original state. Our remapping team road test the car thoroughly and check out that all systems works perfectly before handing over the car to you. Normally we need two days for remapping and road testing. Before leaving the car to us, fuel it up as we need approximate half tank to road test the car. Price for remapping the Audi A6 3.0 is 8.900:-

Optional Dyno Run
For all our clients we offer Dyno Run to really get the improvements on paper. You will get two readings to compare, first with original settings and secondly after remapping and installation of exhaust system. Availability of Dyno Run service is due to seasonal demand.

Specifics for Audi A6 3.0 Liter V6 Supercharged (TFSi)
The Audi A6 has original power/torque: 333Hp/440Nm improves with 18%/13% to 395Hp/491Nm. iPE:s Exhaust system together with remapping of your car improves performance and handling beyond normal standards.