Audi RS6 C7 2013–2018

Exhaust systems - Performance Line

Minimum weight - Maximum sound

Performance Line
Extremely Loud and Comfortably Quiet become one with iPE, Performance Line manufactured in highest quality of stainless steel. The Audi RS6 C7 (Typ 4G, 2013–2018) V8 Bi-Turbo refined with an iPE Innotech Performance Exhaust system produces an extremely loud and aggressive sound as well as a comfortably quiet cruise by the push of a button when wished for.

Our Valvetronic exhaust delivers both power and dynamic valve control to the driver’s seat. The full system includes the remote capability to command 3 different modes: on, off, and auto. In on mode, the valves are fully open for maximum flow and power, releasing a unique and breathtaking sound. In off mode, the valves are closed and volume is reduced for a comfortable cruise. The auto mode enables the system to detect the engine RPM and gas pedal signal to automatically adjust the valve movements for a dynamic driving experience.

Each part of the exhaust system is individually designed to perfectly fit the RS6 C7 (Typ 4G, 2013–2018). Our unique design overcomes the limits set by the stock exhaust, so that performance, sound, and driving pleasure can be increased dramatically.

FULL SYSTEM + ENGINE REMAPPING – ++700HP
The Audi RS6 4.0 liter V8 engine has original power/torque: 560Hp/700Nm and improves performance when remapping engine to 680Hp and 900Nm torque.  iPE:s Performance Exhaust system adds even more power/torque! If you are looking for a car that sounds and performance insanely well, give us a call and we will help you! When we have done the first Dyno run we will revert with exact figures!

  • Power gain aprox +150-180Hp
  • Torque gain aprox +200-250Nm

INSTALLATION OPTIONS / PRICE LIST

SEK
Performance Line Stainless
Full System
99.800 kr
Catback System
79.900 kr
JRP Down pipe
24.900 kr
Assembly
Full System
15.000 kr
Catback System
5.000 kr
Down pipe
10.000 kr
Performance Line Stainless
Full System
11,976 $
Catback System
9,588 $
JRP Down pipe
2,988 $
Assembly
Full System
1,800 $
Catback System
600 $
Down pipe
1,200 $
Performance Line Stainless
Full System
10.470 €
Catback System
8.382 €
JRP Down pipe
2.612 €
Assembly
Full System
1.574 €
Catback System
525 €
Down pipe
1.049 €
Prices above are prices, including VAT. We always leave a detailed quotation before purchase so we can ensure you get the right products for your car.

WATCH & LISTEN

Video
audi RS6 full system engine remapped +700hp

Video
Audi RS6 2017 first system check

Video
Audi RS6 2017 Sound check

 

CATBACK EXHAUST SYSTEM PERFORMANCE LINE: System including Front pipe, Mid pipe, valvetronic mufflers.

 

VALVETRONIC MUFFLERS PERFORMANCE LINE – What is Valvetronic?  All iPE exhaust systems come with a Valvetronic muffler. A Valvetronic muffler (or valve-controlled muffler) includes exhaust valves which can influence the stream/flow of the exhaust gases. The exhaust valves can be controlled manually as well as automatically. The inner structure of the muffler (also called back-box or silencer) are individually designed with the emphasis on upgrading performance and sound, in terms of torque and horsepower as well as sound volume and sound character.

 

VALVETRONIC MUFFLERS PERFORMANCE LINE –  Advantages of iPE:s Valvetronic: iPE’s Valvetronic exhaust systems essentially upgrade two aspects: performance and sound. Performance: When the valves are closed, torque can be increased enormously at the lower rpm range. When the valves are open, dramatic horsepower gains can be reached at the higher rpm range. Sound: With closed valves, the exhaust sound is sporty but comfortably quiet. All vibrating, drone resonance (annoying frequencies inside the car at certain rpm) are cancelled out, so that the driver and passengers can experience a comfort and relaxed ride. With open valves, the exhaust sound becomes as sporty and breathtaking as it gets. The trademark sound of iPE can now be enjoyed without limitations.

 

iPE QUALITY MANAGEMENT:  Each system is individually controlled and marked with serial number. iPE.s quality team can therefor follow up each and every sold system world wide for highest quality management.

 

DOWN PIPES WITOUT CAT: Lightweight “JRP-Down pipes” engineered for maximum performance.  Thanks to the precise calculations of pipe length, pipe diameter, and pipe bending, JRP:s down pipes generate optimal flow of exhaust gases which results in maximum power and torque gains. If you are looking for best performance, weight reduction more power, torque and sound, these optional down pipes are a must! JRP Down pipe is a aftermarket product of highest quality and not a original iPE Down pipe.

 

JRP DOWN PIPES VS ORIGINAL AUDI RS6

 

JRP DOWN PIPES READY TO GO

 

ECU remapping is when we take a read from the ECU’s processing chip of the vehicles standard tuning map. We then adjust various parameters within the map such as fuel pressure, boost pressure (on turbocharged applications) ignition advance and throttle pedal control, amongst others to release the true performance from the engine. Typical gains with remapping is: 20-40% increased Power and Torque and better fuel economy, up to 15% fuel savings. Your car gets more responsive and drivability improves.

The original data is stored on a secure hard drive and can be reinstalled if you for some reason wants to get your car back to its original state. Our remapping team road test the car thoroughly and check out that all systems works perfectly before handing over the car to you. Normally we need two days for remapping and road testing. Before leaving the car to us, fuel it up as we need approximate half tank to road test the car. Price for remapping the RS6 C7 (Typ 4G, 2013–2018) is 8.900:-

Optional Dyno Run
For all our clients we offer Dyno Run to really get the improvements on paper. You will get two readings to compare, first with original settings and secondly after remapping and installation of exhaust system. Availability of Dyno Run service is due to seasonal demand.

Specifics for Audi RS6 4.0 liter V8  – Twin Turbo
The Audi RS6 4.0 liter V8 engine has original power/torque: 560Hp/700Nm improves with 20% to 680Hp/900Nm.  iPE:s Performance Exhaust system adds even more power/torque! Together with remapping of your car it improves performance and handling beyond normal standards. 

 

BODY KIT – CARBON FIBER PARTS – WRAPPING – FORGED WHEELS. If you want to stand out and give your car the extra attention, we offer a wide range of tuning parts from all major manufactures. Give us your wish list and budget and we will make your dream come true! Call us for quotation

Car

Make
Audi
Model
RS6 C7 (Typ 4G)
Manufacturing year
2013-2018
Inquiry

English

ENGINE REMAPPING | ECU PROGRAMMING

ECU remapping is when we take a read from the ECU’s processing chip of the vehicles standard tuning map. We then adjust various parameters within the map such as fuel pressure, boost pressure (on turbocharged applications) ignition advance and throttle pedal control, amongst others to release the true performance from the engine. Typical gains with remapping is: 20-40% increased Power and Torque and better fuel economy, up to 15% fuel savings. Your car gets more responsive and drivability improves.

The original data is stored on a secure hard drive and can be reinstalled if you for some reason wants to get your car back to its original state. Our remapping team road test the car thoroughly and check out that all systems works perfectly before handing over the car to you. Normally we need two days for remapping and road testing. Before leaving the car to us, fuel it up as we need approximate half tank to road test the car. Price for remapping the RS6 C7 (Typ 4G, 2013–2018) is 8.900:-

Optional Dyno Run
For all our clients we offer Dyno Run to really get the improvements on paper. You will get two readings to compare, first with original settings and secondly after remapping and installation of exhaust system. Availability of Dyno Run service is due to seasonal demand.

Specifics for Audi RS6 4.0 liter V8  – Twin Turbo
The Audi RS6 4.0 liter V8 engine has original power/torque: 560Hp/700Nm improves with 21%/28% to 680Hp/900Nm.  iPE:s Performance Exhaust system adds even more power/torque! Together with remapping of your car it improves performance and handling beyond normal standards.